A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations
We offer the following Fire Alarm services:
* Fault Findings
* Survey and System Advice
This system generally suitable for smaller businesses or properties. Devices are connected directly into a control panel via their own fire proof cable. If a cable is broken for any reason, then the device will stop working. For larger premises or on say 2 or more floors, devices can also be connected in Zones. E.g. Zone 1 ground floor, Zone 2 first floor. If a device activates due to smoke or fire then at least it would be possible to identify roughly where on your premises there is a fire.
All devices such as smoke detectors or call points are linked back to a control panel via fire proof cable loop. If a device fails to work for any reason, the remainder will keep on working. Every device connected to an addressable system has a unique address. When a fire is detected, the address is highlighted on the main control panel indicating which device has been activated. This indicates the precise location of a fire and enables a relevant fast safe response. This system could save a lot of valuable time finding a fire when compared to a non addressable system